Pool Equipment Leak Repair
A drip at the pump or a spraying union never fixes itself. We repair equipment leaks and give straight repair-or-replace advice.
Free quote request
Tell Us What the Pool Is Doing
Your information stays private and is only used to respond to your request.
What We Offer
About Pool Equipment Leak Repair
Everything that moves your pool’s water lives at the equipment pad: the pump, filter, heater, and the valves and pipes connecting them. Leaks here are the easiest to see and the easiest to underestimate. A drip at the pad rarely stays a drip, because most equipment leaks sit next to something expensive.
The pump shaft seal is the classic example. A small weep lets water creep toward the motor bearings, and by the time the pump starts screaming, a seal replacement has become a motor replacement. Union o-rings behave the same way, seeping quietly until they spray under full pressure. Catching equipment leaks early is the cheapest repair in pool ownership.
Two kinds of equipment leak
The pad gives away which side failed, if you know what to look for. Leaks after the pump sit on the pressure side, where water is being pushed, so they show themselves honestly: drips, spray, a wet slab under the filter while the system runs. Leaks before the pump sit on the suction side, and they do something sneakier. Instead of letting water out, they pull air in, showing up as bubbles from the returns, a pump basket that won’t stay full, or a pump that loses prime overnight. Same word, leak, two opposite symptoms, and knowing which one you’re looking at is half the diagnosis.
What we repair at the pad
- Pump shaft seals, housings, and unions
- Filter multiport valves, tank o-rings, and drain plugs
- Heater manifolds, headers, and pressure switches
- Valve rebuilds and replacements
- PVC repairs at the equipment pad
Repair it, or replace it?
Every equipment visit comes with an honest answer to that question. The math weighs age, part availability, energy use, and the repair cost against the unit’s remaining life. A five-year-old pump with a bad seal gets a seal. A fifteen-year-old pump on its third repair gets a frank conversation. Either way you see the reasoning, not just a quote, because nobody here works off an equipment sales quota.
Why the Pad Deserves Attention
Caught before it cascades
Fixing a seal or o-ring now prevents the motor, bearing, and tank failures that leaks feed.
Water traced to its source
Water runs along pipes and lies about where it came from. Diagnosis means running and resting the system, not glancing at the puddle.
Whole-pad inspection
While we’re there, the entire pad gets looked over, because equipment leaks rarely come alone.
Local Coverage
Pool Equipment Leak Repair Across Central Texas
Austin Pool Leak Repair provides pool equipment leak repair throughout our primary service area, with owner-operated scheduling and the same direct process in every city.
Service available in
6 featured citiesService Questions
Frequently Asked Questions
Clear answers about testing, timing, repairs, and what to expect. If your question isn’t here, call us and we’ll talk it through.
Call (737) 265-194301 Why is there water under my pool pump?
The usual suspects are the shaft seal, the unions on either side of the pump, or the drain plugs. Heaters also produce condensation that can be mistaken for a leak. Part of the diagnosis is telling those apart, because the fixes are completely different.
02 Is a small drip at the equipment pad really worth a service call?
A drip that costs a few dollars in water can destroy a motor that costs hundreds. Shaft seal weeps in particular sit directly in the path of the motor bearings. Small equipment leaks are the best money-to-damage ratio in pool repair: cheap to fix, expensive to ignore.
03 Can an equipment leak explain my pool losing water?
Yes, especially leaks that only happen while the pump runs, since the system is under pressure then. If your pool loses more water on heavy circulation days, the equipment pad is a smart place to start looking.
04 My filter sprays water when the pump starts. What is that?
Usually a multiport valve gasket or a tank o-ring that seals fine at rest but gives way under startup pressure. It’s a common failure with an inexpensive fix, and much better addressed before the spray becomes a stream.
Get a Clear Answer
Ready to Stop Losing Water?
Tell us what your pool is doing. Alfredo will review the details and follow up to schedule the right detection or repair visit, without the runaround.
- Owner on every job
- Detection and repair
- Upfront pricing
Free quote request
Tell Us What the Pool Is Doing
Your information stays private and is only used to respond to your request.